Acer 510 Series - Manual (Page 119)

BIOS Utility
Chapter 5 Software 97
Onboard Devices Configuration
The Onboard Devices Configuration screen contains
parameter settings for your hardware connection devices.
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested
parameter settings.
Hard Disk Enables boot-up from the hard disk drive.
Caution: The parameters in this screen are for
advanced users only. You do not need to change the
values in this screen because these values are
already optimized.
Parameter Description
Serial Port Enables or disables the serial port.
Options: Enabled or Disabled
Base Address Sets the I/O address of the serial port.
Options: 3F8h, 2F8h, 3E8h or 2E8h
Parameter Description
510.book : 510-5.fm Page 97 Thursday, March 4, 1999 1:03 PM