Acer 510 Series - Manual (Page 117)

BIOS Utility
Chapter 5 Software 95
Startup Configuration
The Startup Configuration screen contains parameters that
are related to computer startup.
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested
parameter settings.
Parameter Description
Boot Display Sets the display on boot-up.
When set to Auto, the computer automatically
determines the display device. If an external
display device (e.g., monitor) is connected, it
becomes the boot display; otherwise, the
computer LCD is the boot display. When set to
Both, the computer outputs to both the
computer LCD and an external display device if
one is connected.
Options: Auto or Both
USB Function
Support Enables or disables the USB (Universal Serial Bus)
function.
Options: Disabled or Enabled
510.book : 510-5.fm Page 95 Thursday, March 4, 1999 1:03 PM