Bosch THD2023 Heißwasserspender Filtrino FastCup - Manual (Page 18)

18
Robert Bosch Hausgeräte GmbH
en
► Set the on/off switch to on. All display
items will light up briel y, and then the L
icon stays lit.
► Place a glass or cup holding at least
150 ml on the cup stand under the
water outlet.
► Press the start/stop button to dispense
one portion of water to rinse the
appliance.
Note: Before using the appliance for the
i rst time or after a long period of non-use,
do not drink the i rst glass of water.
The machine is now ready to use.
Dispensing water
► Set the cup stand to the appropriate
height for the cup or glass.
► Place the cup or glass under the water
outlet.
► Press the temp. set button to select the
desired temperature.
► Press the start/stop button. The water
will dispense from the outlet. The
selected temperature l ashes while the
water is dispensed.
Height adjustment
The adjustable cup stand lets you adjust
the distance between your cup or glass and
the water outlet. The lowest setting is suit-
able for taller glasses and cups. For smaller
cups or soup cups you can insert the cup
stand into one of the upper openings.
Important: Don´t use the appliance without
cup stand.
Fill quantity
The appliance ships with a preset i ll
quantity of 120 ml. You can change this
quantity.
To adjust the i ll quantity, proceed as
follows:
► Select any temperature (for example,
90 °C).
► Turn the appliance off with the on/off
switch.
► Press and hold the start/stop button.
► Turn the appliance on with the on/off
switch. The indicator for the currently
set i ll quantity l ashes.
► Press the temp. set button to select the
desired i ll quantity:
L = approx. 120 ml
70 °C = approx. 150 ml
80 °C = approx. 200 ml
90 °C = approx. 250 ml
Q = approx. 300 ml
► Release the start/stop button – the
setting is now stored.
Filtrino_H1_all_languages.indd 18 01.08.2011 10:52:08