Bosch sphera Bodenstaubsauger mit Staubbeutel BSD3030 schwarz - Manual (Page 34)

33
Replacement parts and accessories
A Replacement filter pack
Filter type G (BBZ41FG)
For best performance: Gplus (BBZ41GPLUS)
Contents:
4 filter bags with seal
1 micro-hygiene filter
http://www.dust-bag-bosch.com
B Textile filter (long-term filter) BBZ10TFG
Reusable filter with Velcro fastening.
C HEPA Filter BBZ8SF1
additional filter for pure exhaust air.
Recommended for those with allergies.
Replace every year.
D TURBO-UNIVERSAL ® -upholstery brush BBZ42TB
Simultaneously brush and vacuum upholstered furniture,
mattresses, car seats, etc..
Particularly suitable for vacuuming animal hair and fur.
The brush roller is driven by the suction force of the
vacuum cleaner.
No electrical connection required.
E TURBO-UNIVERSAL ® - floor brush BBZ102TBB
Simultaneously brush and vacuum short-pile carpets
and fitted carpets or any kind of covers. Particularly
suitable for vacuuming animal hair and fur. The brush
roller is driven by the suction force of the vacuum
cleaner.
No electrical connection required.
F Hard floor nozzle BBZ123HD
To vacuum smooth flooring (parquet, tiles, terracotta...).
Before using for the first time
Illustration 1*
Push the handle onto the flexible tube and until it
engages.
Starting up
Illustration 2
a) Lock the suction hose supports into the suction opening.
b) When removing the suction hose, press together both
latches and pull out the hose.
Illustration 3*
Connect the handle and the suction hose.
Illustration 4*
a) Connect the floor nozzle and the suction hose.
b) Insert the telescopic pipe into the supports of the floor
nozzle and secure by turning.
Illustration 5*
a) Connect the suction hoses.
b) Unlock the telescopic pipe and adjust to the desired
length by moving the adjusting button / sliding sleeve in
the direction of the arrow.
Illustration 6*
Slide the attachment support on to the combination
nozzle and clip on to the suction / telescopic pipe
Illustration 7
Take the mains cable by the plug and pull out the desired
length and then plug in to the mains socket.
Illustration 8
Switch on / off the vacuum cleaner by pressing the on /
off button in the direction of the arrow.
Illustration 9*
a) Set the level of suction by turning the on / off button in
the direction of the arrow.
b) The suction performance can also be regulated by
turning the secondary air regulator in the direction of the
arrow.
Ⅲ Secondary air opening open
Ł Suction reduced
Ⅲ Secondary air opening closed
Ł Maximum suction
Suction
Illustration 10
Setting the floor nozzle:
Ⅲ fitted carpets and carpets
Ł
Ⅲ smooth floors Ł
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Illustration 11*
Vacuuming with accessories
(connect to the handle or the suction hose as required)
a) Combination nozzle
For vacuuming in corners, joins, upholstery, curtains etc.
b) Corner nozzle
For vacuuming in corners and joins
c) Upholstery nozzle
For vacuuming upholstery, curtains etc.
d) Mattress nozzle
For vacuuming mattresses, upholstery etc.
e) Hard floor nozzle
For vacuuming hard floor surfaces (tiles, parquet etc.)
f) Furniture brush
To vacuum window frames, cupboards, sections etc..
5100 003 409 A (Innenteil) 29.01.2013 7:57 Uhr Seite 33