Alto-Shaam 500-E User Manual
Page 6
1.
An identification tag is permanently mounted
on the cabinet.
2.
Plug the unit into a properly grounded
receptacle ONLY. Arcing will occur when
connecting or disconnecting the unit unless
all controls are in the “OFF” position.
3.
Position the unit so the cord is easily accessible
in case of any emergencies. If necessary, a
proper receptacle or outlet configuration, as
required for the unit, must be installed by a
licensed electrician in accordance with
applicable, local electrical codes.
230V:
To prevent an electrical shock hazard between the
appliance and other appliances or metal parts in
close vicinity, an equalization-bonding stud is
provided. An equalization bonding lead must be
connected to this stud and the other appliances /
metal parts to provide sufficient protection
against potential difference. The terminal is
marked with the following symbol.
NOTE:
The appliance must be connected to an
electrical circuit that is protected by an
external GFCI outlet.
Op e ra tio n a n d C a re Ma n u a l • 5.
I N S TA L L AT I O N
Electrical Installation
ELECTRICAL
VOLTAGE
PHASE
CYCLE
/
HZ
AMPS
kW
125
1
50/60
4.0
.50
208-240
1
50/60
4.4
1.10
230
1
50/60
4.3
1.0
230
1
50/60
3.3
.75
NEMA
6-15
P
, 15A-250
V PLUG
NEMA
5-15
P
, 15A-125
V PLUG
CEE 7/7, 220-230
V PLUG
500-E
500-E/Deluxe