Penn-Century MIP - Manual (Page 4)

Cleaning instructions:
1. The entire Plexiglass®/Perspex® base and all the fittings maybe cleaned with ethanol or
a dilute solution of (e.g. Clorox® /Clidox®). The device may be immersed in the solution
and/or it may be applied generously with a paper towel, sponge or soft cloth. Do not
use abrasive pads, or common glass or window cleaners that contain alcohol or
ammonia – such as Windex™ which can harm the surface. Do not autoclave the device
or subject it to high heat as this will cause it to warp.
2. The nylon “wire” can be cleaned and re-used. Additional wire is provided. The stainless
steel posts and the Delrin® fittings can be wiped clean with a damp cloth, using ethanol
or (e.g. Clorox® / Clidox®).
3. Dry the platform with a soft, lint-free clean cloth.
This device is for laboratory use only; not for human in vivo use.
Questions? Call Penn-Century, Inc. (215) 753-6540