Abcoffice – ABC Office ROYAL Alpha 583cx User Manual

Page 29

Alpha 583cx User’s Guide

Setting Alphanumeric Descriptions

Note

If you enter the wrong character, press the Void key to backspace and delete
that character and then continue.

To program your logo
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number

and then press the Check key. If you did not program a Manager
Password, go to the next step.

3 For the 1st line, do the following:

• Using the round Number keys area, press

31.

• Press the Return key. The Logo line 1 appears on the display.

• Enter the 1st line of the logo, up to 24 characters and then press the

Check

key.

4 If you want a 2nd line, do the following:

• Using the round Number keys area, press

32.

• Press the Return key. Logo line 2 appears on the display.

• Enter the 2nd line of the logo, up to 24 characters and then press the

Check

key.

5 If you want a 3rd line, do the following:

• Using the round Number keys area, press

33.

• Press the Return key. Logo line 3 appears on the display.

• Enter the 3rd line of the logo, up to 24 characters and then press the

Check

key.

6 If you want a 4th line, do the following:

• Using the round Number keys area, press

34.

• Press the Return key. Logo line 4 appears on the display.

• Enter the 4th line of the logo, up to 24 characters and then press the

Check

key.

7 If you want a 5th line, do the following:

• Using the round Number keys area, press

35.

• Press the Return key. Logo line 5 appears on the display.

• Enter the 5th line of the logo, up to 24 characters and then press the

Check

key.

8 When you are done, turn the Mode key to Off.

abcoffice