Actiontec electronic WNS100 - Manual (Page 20)

17
Using the
Administrative Utility
This chapter describes using the NAS Device’s Administration Utility. With the
Utility, the administrator can check the NAS Device’s status, add or delete users, or
create user groups.
Accessing the Administrative Utility
To establish a connection from a computer to the NAS Device:
1. Follow steps 1 through 7 of “Accessing the NAS Device” (see page 6).
2. The Utility’s “Home” screen appears.
3. To access the Administration interface, click Administration on the right. A
password prompt appears, as shown below.
3