Pach and Company AeGIS SK9 - Manual (Page 2)

1. RS-485 Polarity sensitive. Use 18-2 shielded stranded
wires or Category 5 twisted.
2. Earth Ground use 16 gauge solid wire
3. Power 12 Vac 40VA supplied
Use 12 Vdc power supply if battery back up is used.
4. Optional 26-Bit Wiegand Reader can be installed for
double security. Combination of card reader and 4-digit
access code.
Enable function 24 on the 9000 or NPB 9000 for this
feature.
TO GAIN ACCESS, PRESENT THE CARD OR KEYFOB
THEN PRESS
then 4-digit access code.
5. JP3= OFF and JP4=ON must be set as shown on
diagram above.
Connection for multi systems is same as single system
1
2
3
4
5