Airlink101 airlink 101 awll5077 - Manual (Page 28)

27
4.7.1 Configuring WEP encryption
Select WEP from the Data encryption box.
Under Network Authentication, select either Shared key or Open System, depending
on the router settings.
If your WEP key is 5 or 13-digit, alphanumeric :
• Check ASCII and enter your WEP key into the box next to Passphrase
If you use Passphrase to setup the WEP encryption for your router :
• Check PASSPHRASE and enter your key into box next to Passphrase.
If your WEP key is 10 or 26-digit, hexadecimal (0~9, A~F) :
• Key Index is the key of the router that is currently in use. Enter the network
security key that matches the one on the router to Network key and Confirm
network key boxes.
Click OK to save your settings.