Nova-Tech GFK Series - Manual (Page 46)

44 | P a g e © Adam Equipment Company 2011
13.2. RS-232 PARAMETERS
•
Shortcut to enter this group is to press and hold the [Print] key for 4 seconds.
The display will go directly to “C1 on”.
•
Press [Func] to view the list of parameters.
•
Press [Tare] to enter a parameter. Press [Func] to view the options for the
parameter settings.
•
Press [Tare] to confirm the change and then advance to the next parameter
by pressing the [Func] key.
•
Press [Zero] to return to the group “FUnC 2”. If you press [Zero] again, the
scale will exit the User Parameter section and return to weighing.
This group of parameters can be set by the user for setting the language, baud rate,
printing mode, etc. The user can also set a Scale ID number and a User ID number.
Parameter Description Options Default Values or
setting
C1 on Enable or disable the RS-
232 interface
Prt on
Prt oFF
Prt on
C2 bd Baud Rate 600
1200
2400
4800
9600
19200
9600