Nova-Tech GFK Series - Manual (Page 14)

12 | P a g e © Adam Equipment Company 2011
[Low
Limit]
&
[High
Limit]
It sets the limits for check weighing and
allows setting of either the low limit or the
high limit or both.
None
[ Lim] It stores and recalls any of 10 preset limits None
[Func] This is used to select percent weighing, RS-
232 parameters, Operation of the bar
graph, RTC settings, User ID and Scale ID.
None
[Count] Enter Parts Counting None.
[Print] It is used to print the results to a PC or
printer using the RS-232 interface. It also
adds the value to the accumulation memory
if the accumulation function is not
automatic.
None
[1] to [0]
and [CE]
Allow entering numerical values where
required, setting of limits, tare value, time
and date for example.