Nova-Tech CQT Series - Manual (Page 7)

3.4 LOCATING AND PROTECTING YOUR BALANCE
In order to keep your balance functioning at its best we suggest that you do the
following:
Avoid extremes of temperature. Do not place in direct
sunlight or near air conditioning vents.
Make sure the balance is located on a strong table and free
from vibration.
Avoid unstable power sources. Do not operate near large
users of electricity such as welding equipment or large
motors. Do not leave batteries in the balance if you are not
using it for a long time.
Keep free from vibration. Do not place near heavy or
vibrating machinery.
Avoid high humidity that might cause condensation, and
keep away from direct contact with water.
Do not place near open windows, air‐conditioning vents or
fans that may cause a draft and unstable readings.
Keep the balances clean, and do not stack material on the
balance when it is not in use. The Core has a stacking feature
allowing more than one unit to be stacked on top of each
other. For more details on this see the section on storing.
7 | P a g e © Adam Equipment Company 2008