0 set up, 1 unpacking and setting up your balance, Set up – Nova-Tech CQT Series User Manual

Page 4: Unpacking and setting up your balance, 0 set

3.0 SET

3.1 UNPACKING

AND

SETTING

YOUR

BALANCE

1) Remove the shipping protection screw and round cover as shown below using

the Allen key supplied in the box. (It is advisable to keep the shipping
protection screw and the round cover along with the packing box for using
during shipping to another location in future).

Shipping protection screw

Round cover around the screw

2) Place the pan (which

comes separately packed) in the receptacles on the top

cover.

Use the shipping protection
screw that you removed to
screw the plastic pan into
place. Be careful when
putting the screw in that
you do not use too much
force as it can damaged the
loadcell. You should just be
able to use light force to
secure the screw.

3) Place the stainless steel pan on top of the plastic pan.

4) Place the balance on a firm and flat surface for accurate weighing.

4 |

P a g e