Nokta detectors Golden Sense User Manual - Manual (Page 8)

NOKTA ENGINEERING 7
ASSEMBLY
Connect the end connector on the search coil
cable with the connector underneath the handle
and tighten.
Insert the shaft in its socket underneath the
handle and start rotating the twist lock. As you
rotate the twist lock it will slide down. Before
rotating the twist lock all the way, push the shaft
up again making sure that it is in place and
secure it by tightening the twist lock.
To adjust the height of the device, loosen the twist
lock on the shaft. After adjusting the shaft length to
your height, re-tighten.