Nokta detectors Golden Sense User Manual User Manual

Page 21

SEARCHING AND METAL DETECTION

All Metal:

This is the deepest mode of the device. The device will not discriminate metals in this mode. It will

produce one warning tone for all metals and the LEDs on the metal discrimination indicator will not

light up.

Discrimination:

In this mode, the device will produce different tones based on metal type. At the same time, the LEDs

on the handle will also light up based on metal type. Depths in this mode may vary compared to All

Metal mode.
The device has 2 tone audio discrimination and it has 2 different color LEDs for visual discrimination.

The device produces a different tone for Ferrous and for Gold/Non-Ferrous metals. The low-tone is for

ferrous metals. For gold/non-ferrous metals, the device produces a higher tone.

The LEDs on the handle will light up according to the detected metal's being Gold/Non-Ferrous or Ferrous. Both LEDs may

light up in turn in case of Steel/Alloy detection and the device may produce a double-tone sound.
NOTE: Discrimination, just like in any other metal detector, may not always be 100% accurate. There are many different

factors affecting discrimination accuracy. All metals based on their conductivity, alloy composition, shape, orientation

underground, depth and ground mineralization are sensed differently by a detector.
Oxidized metals buried under ground for a long time such as tinplates and tins may produce gold like signals. Following the

experienced metal detector users' rule of thumb "when in doubt, dig" is the right thing to do.

SEARCH MODE

SEARCH MODES