Diamond Products SB - Manual (Page 5)

TYROLIT Hydrostress AG
Page 5 SB
Design and function
Method of operation
The diamond wire is driven by a motor via the drive roll unit. The diamond wire is pulled into
the SB wire saw via the swivel arm (A). The diamond wire can be stored in the SB wire saw on
several rolls (B).
A Drive roll unit
Swivelling movement via hydraulic cylinder
B Diamond wire storage
Diamond wire direction of travel
The direction of travel of the SB wire saw is predetermined by the freewheeling of the drive roll-
ers and cannot be changed.
3.1 3.1
3.2 3.2
3