Multichannel Systems MEA1060-Inv-BC Manual - Manual (Page 58)

MEA Amplifier with Blanking Circuit for Inverse Microscopes
54
Accessories
Product Product
Number Description
Adapter for MEAs with 8
special electrodes for
stimulation MEA-
STIM-
Adapter For use with MEAs 200/30-Ti-stim or 200/30-ITO-stim,
and MEA1060-Inv amplifier.
Holder with M3 threads MPM3 For fixing tools with M3 threads next to the MEA
1-Channel temperature
controller TC01
2-Channel temperature
controller TC02
PID based technology, set-point temperature reached
fast within 30 s to 5 minutes, control temperature range
from ambient temperature to +50 °C
Perfusion cannula with
programmable fluid
temperature PH01 Temperature can be programmed with the temperature
controller TC01 or TC02
Signal divider for MEA-
Systems SD-MEA Placed between an MEA1060 amplifier and MC_Card,
permits to select any channel, does not interfere with
the data acquisition, for example, for connecting an
oscilloscope or other devices to single channels
Test Model Probe for
MEA1060 amplifiers Test-MEA Test model probe with CB-GND cable (for ground
connection). For all MEA1060 amplifiers.
Signal Generator for
MEA1060 amplifiers MEA-SG Signal generator for MEA Systems: Can be placed in
MEA1060 amplifier. Simulates 12 different types of sine
curves and biological signals.
Signal Generator for USB-
MEA256-System 256MEA-
SG Signal generator for USB-MEA256-Systems: Can be
placed in USB-MEA256 amplifier. Simulates 12 different
types of sine curves and biological signals.
Stimulus generators
Product Product
Number Description
2-Channel stimulus generator STG4002
4-Channel stimulus generator STG4004
8-Channel stimulus generator STG4008
General-purpose stimulus generators for current
and voltage-driven electrical stimulation, 4000
series, with integrated stimulus isolation unit for
each output channel. Operating in Download and
Streaming mode (continuous downstreaming of
pulses from connected computer). MC_Stimulus II
program with advanced features.