Multichannel Systems MEA1060-Inv Manual - Manual (Page 27)

Appendix
27
7.3 Contact Information
Local retailer
Please see the list of official MCS distributors on the MCS web site.
User forum
The Multi Channel Systems User Forum provides the opportunity for you to exchange your
experience or thoughts with other users worldwide.
Mailing list
If you have subscribed to the Mailing List, you will be automatically informed about new software
releases, upcoming events, and other news on the product line. You can subscribe to the list on
the contact form of the MCS web site.
www.multichannelsystems.com
7.4 Ordering Information
Product information is subject to change without notice. Please contact your local retailer for
pricing and ordering information.
MEA amplifiers
Product Product Number Description
MEA amplifier for inverted
microscopes MEA1060-Inv
MEA amplifier for upright
microscopes MEA1060-Up
Probe interface and 60 channel pre- and
filter amplifier with custom gain and
bandwidth.
MEA amplifier with blanking
circuit for inverted microscopes MEA1060-Inv-BC
MEA amplifier with blanking
circuit for upright microscopes MEA1060-Up-BC
Probe interface and 60 channel pre- and
filter amplifier with custom gain and
bandwidth. The blanking circuit prevents
the amplifier from getting saturated and
thus prevents stimulus artifacts.
MEA Switch
Product Product
Number Description
MEA Switch for
4 amplifiers MEAS4/2
MEA Switch for
2 amplifiers MEAS2/1
The MEA Switch allows you to acquire data from 60 single channels
from two MEA1060 amplifiers. If you have a 128-channel MC_Card
(MEA120-System), you can even pick 128 channels in total from two
MEA pairs with the MEA Switch for four amplifiers MEAS4/2. The
selected channels are combined to one Electrode Raw Data stream
that is delivered to MC_Card by a 68-pin MCS high grade cable.