Multichannel Systems µPA16+32 Manual - Manual (Page 15)

11
4.1.2 Output Connector
The signal ground is connected to the ground of the amplifier. The signal ground
is used as the reference for the following filter amplifier.
Pin Channel Pin Channel
Pin 2 Channel 1 Pin 11 Channel 2
Pin 3 Channel 3 Pin 12 Channel 4
Pin 4 Channel 5 Pin 13 Channel 6
Pin 5 Channel 7 Pin 14 Channel 8
Pin 6 Channel 9 Pin 15 Channel 10
Pin 7 Channel 11 Pin 16 Channel 12
Pin 8 Channel 13 Pin 17 Channel 14
Pin 9 Channel 15 Pin 18 Channel 16
1, 10, 19, 23 Ground GND
20, 21, 22 Positive supply voltage
24, 25, 26 Negative supply voltage