En g li s h light and sound signals, Unit functions – MIDLAND BT Rebel User Manual
Page 11

11
E
n
g
li
s
h
LIGHT AND SOUND SIGNALS
LED indication
Status
GENERAL
None
Unit is switched off or full charged when connected to the power supply
Single Blue flash every 3 seconds
Unit being turned on
Triple red flash
Unit being turned off
Single Blue flash every 3 seconds
Single Red flash every 3 seconds
Standby
Standby - low battery
RED and BLUE (together) every 3
seconds
Active
RED and BLUE (together) and one flash
of RED light every 3 seconds
Active but low battery
Single red flash every 2 seconds
Unit in charge when connected to the power supply
SETUP
Steady Red
Setup mode
Rapid Red-Blue alternating flash
Pairing mode (searching for devices)
Steady Blue for two seconds
Successful pairing/ Reset paired devices
Audio signals
Status
Ascending tone (low-high)
Unit being turned on
Descending tone (high-low)
Unit being turned off
1 tone
Specific feature turned on
2 tones
Specific feature turned off
UNIT FUNCTIONS
If you want to...
…do this
GENERAL
Turn on the unit
Press the Music button for 3 seconds at least (start Blue flash)
Turn off the unit
Press the Music and AUX button together for 3 seconds (triple Red flash)
Increase the volume
Short or continues press on the Volume Up control
Decrease the volume
Short or continues press on the Volume Down control