En g li s h midland bt1 intercom, Technical speciﬁcations of midland bt1 – MIDLAND BT1 User Manual

Page 3

Midland BT1 Intercom

Thank you for purchasing the Midland BT1 Intercom, the wireless Intercom system for bikers. The Midland BT1 is designed to be
ﬁtted directly on to your helmet and to be used for communications between driver and passenger. Besides, the driver’s unit can
be used to communicate with Bluetooth devices like cell phones or GPS Sat-Navs.
Both devices are also supplied with a wired connection that can be used to connect an iPod/MP3 player and allow for an external
connector to be used for connecting to a GMRS radio- increasing Bike to Bike communication range up to 3 miles.

BT1 - Content of the packaging

2 devices: one for Driver and one for Passenger

› 2 audio kits with two stereo speakers, microphone with

boom and wire microphone

› 2 plates with bi-adhesive strip to ﬁx the unit onto the hel-

met

› 2 clamps to ﬁx the unit onto the helmet
› 2 stereo audio cables to connect an iPod/ or other models

of MP3 players

› 1 mini USB wall-mounting power supply with double plug
› Wind Suppressing Foam Microphone Cover, Allen key and

Velcro strip for assembly

The units included in the packaging are already paired and
can therefore be immediately used in the Intercom mode.

›

Technical speciﬁcations
of Midland BT1

General:
› Bluetooth ver. 2.0 stereo (Headset/Handsfree/A2DP proto-

col)

› AGC system automatically controls the volume in relation

to background noise

› Voice (VOX) or manual communications option
› Private or shared (3-way communications) call mode
› Manual controls to enable: telephone, intercom and wire

connection

› Fully waterproof
› Lithium battery with 8 hours talk time (up to 2 days in stan-

dby mode)

› Recharge time: app. 4 hours
› Dimensions. Length: 87 mm – Width: 47 mm - Thickness:

16 mm

Bluetooth connections:

Driver’s device:
- with passenger’s unit, in Intercom mode Driver-Passen-

ger

- with Cell phone, GPS (Garmin Zumo and TomTom Rider

1 and 2)

With passenger’s device:
- only with the driver’s unit in Intercom mode Driver-Pas-

senger

Wire connections for both units:
› For stereo audio input (iPod/MP3 player)
› For GMRS transceivers (with optional cable)
Attention: before using BT1 for the ﬁrst time, remember
to recharge it for at least 4 hours.
Attention: Midland BT1 is designed to withstand rain and
water. However, if it is raining, always verify that the rub-
ber caps protecting the sockets are fully ﬁtted.

›