MIDLAND BTX2 - Manual (Page 7)

7 - Midland BTX2 midlandusa.com
tionalities and listen to the stereo music. An incoming call has the higher priority,
so all other communications will be closed (Intercom, Music).
Pairing to a GPS navigator
The GPS can be paired on the “Volume +” button when the paired “Phone mode“
is active.
Attention: If you need to connect both Phone and GPS, you must pair the Phone
to the GPS itself.
Bluetooth connection always in Background
This feature lets you keep the Bluetooth connection via the “Volume+” button
present in the background when the Intercom is open (this allows GPS navigator
announcements to be heard while the intercom is open).
Enabling/Disabling the Background feature:
Press the “Volume -” button for three seconds. A voice announcement will tell you
the status. The background feature is active by default.
Pairing the BTX2 to a Phone
To pair the BTX2 to a Phone, you must first enter setup mode:
1. Turn off the unit
2. Press and hold down the “Middle” button about 7 seconds, until the Red light
is on permanently.
3. Now press for 3 seconds the “Volume +” button, the Blue and Red lights will
flash.
4. Enable the Bluetooth device search feature on your mobile phone
5. After a few seconds, “Midland BTX2” will be displayed on your mobile phone.
6. Follow the pairing procedure of your Phone. If a pin code is requested you
must enter “0000” (four times zero).
When successfully paired, the Blue light of the unit will be on for one second and
then the unit will exit setup mode and switch to the working mode (the Blue light
will start flashing).
You can use now your BTX2 together with the Phone.
How to use a Phone
After pairing your phone to the BTX2 unit you must switch to the “Phone” mode
in order to use all the phone/MP3 music player features. If you are in “Intercom”
mode you can only manage the incoming phone call. To activate the “phone”
mode, press the “Middle” button until you hear “Phone” from the voice announce-
ment. Now all three main buttons are dedicated to the phone (see Table B)
Answering a call in both Phone/Intercom mode
When you hear the phone ring, you can answer in two different ways:
Vocally:
Simply say one word to answer the call and start talking.
Remember that you can only do this if you answer the call after the third ring.
Attention: Be aware that some phones may not support voice answering
Manually:
Tap the “Forward” button and start speaking.
Rejecting a call in both Phone/Intercom mode
If you don’t wish to answer, you can let the mobile phone ring or press the “For-
ward” button for a few seconds (you will hear one audio confirmation tone).
Making a call in Phone mode
There are several ways to make a call.
From the mobile keypad:
Dial the number on the mobile keypad:
Press “Send” on the mobile phone.
To redial the last number:
Press “Forward” button for 3 seconds in order to redial the last number (you will
hear one audio confirmation tone).
To make a voice call:
Briefly press “Forward” button. If your mobile phone supports voice calls, you will
be asked to speak the name of the contact you wish to call.
Priority: Calls have a high priority, which means that all other communications are
B-Phone mode
Mode
Forward button Middle button Back button
Phone Tap: Voice dial /accept or close if
it is in progress
Long press (3 seconds): Redial last
number or reject incoming call Long press (3 seconds): Change mode Long press (3 seconds): Toggle on/off
wired
Phone (when music is
playing) Tap: Next song Tap: Play/pause
Long press (3 seconds): Change mode Tap: Previous song