MIDLAND BT2 User Manual

Page 18

SPECIAL SETUP CONFIGURATION
3 way conversation always on

While in Setup mode, press the Phone and AUX buttons for 3 sec.

Steady Blue for two seconds= activated Double long flash = deactivated

Change VOX sensitivity or disable it

While in Setup mode, press short the AUX buttons (blue light on). Now, press “Volu-

me +” or “Volume -“to increase or reduce sensitivity. Press again the AUX button to

confirm the new setting and go back to the SETUP mode (Red light always on).

Blue light flashing:

Once = VOX disable

Twice = very low sensitivity

3 times = low sensitivity

4 times = medium sensitivity.

5 times = high sensitivity

Exit SETUP mode

While in Setup mode, long press the Intercom button. The Red light will turn off and

the Blue light starts flashing.

European CE Notice Certification and Safety Approvals Information

This product is CE marked according to the RTTE Directive (99/5/EC) and is free use in all the EU countries.

Users are not permitted to make any changes or modifications to the device.

Modifications which are not expressly approved by the producer invalidate the warranty card.

For further information, please go to our website

www.cte.it