Mobi Technologies 70121 DualScan PRIME - Manual (Page 19)

Problem Checklist Countermeasures
Change to new batteries.
Remove batteries and reinsert
batteries correctly.
Follow steps in User's Manual for
proper measurement. Check the
operation method.
Contact Mobi Technologies, Inc. via
the contact info at the end of this
User’s Manual and report which
Error Message is being displayed.
Retake measurements within
proper operating conditions where
room temperature is well within
the range of 50ºF-104ºF (10ºC-
40ºC).
TROUBLESHOOTING
19
Batteries low or dead?
Batteries installed in wrong
polarity?
Poor battery contact?
Measured temperature is lower
than 32.0°C / 89.6°F or higher
than42.9°C / 109.3°F
These Error Messages indicate
a problem with the hardware.
Room or environment
temperature exceeds proper
operating conditions.
No response / automatic
reset when pulling out
plastic insulator tab.