Mobi Technologies 70121 DualScan PRIME User Manual

Page 14

Press and hold the Settings Button for about 2

seconds to enter into the Settings mode.

Press the Settings Button again to go to the

Time / Date format and select 12hr or 24hr mode.

Note: PM will display on screen when in 12hr

format. Then select Hour, Minute, Year (2001~

2099), Month, Day and whether Sleep Mode is

ON or OFF.

When the Sleep Mode is active, the thermometer

will turn OFF automatically after 1min to 3min

(depending on the factory default). When Sleep

Mode is deactivated, the thermometer remains

with power ON continuously.

Note: For saving battery power, we recommend

that you set Sleep Mode to ON.

While in a Settings mode or Format, advance

through the numbers by pressing the Memory

Button as needed.

To return to normal mode, press the Ear and

Forehead Buttons at the same time.

The thermometer will also go back to normal

mode automatically after 1 minute of non-use.

With the thermometer in Measuring or Memory Mode, press and hold the

Settings Button to switch between Celsius and Fahrenheit.

SETTING TIME AND DATE

SETTING TO CELSIUS OR FAHRENHEIT