Mirion Technologies WinWRM2 - Manual (Page 2)

WinWRM2
Remote Monitoring Software
www.mirion-hp.com
SYSteM ReQuIReMentS:
Computer Platform
InteL Pentium 500MHz PC or 100% compatible with a keyboard and bus mouse •
256 Megabytes RaM •
500 Megabytes free on hard drive after installation of Windows (1Gig for x64-bit systems) •
SVGa video card and monitor capable of 800 x 600 resolution •
One CD ROM drive •
WRM Plus or WRM2 Base Receiver •
DMC 90, DMC 100, DMC 2000 dosimeters with transmitters; aMP-DRM-RaMIOn-telepole portable instruments with eternal transmitters; aM- •
16, DDC-16
a tCP/IP network as described in the previous section and/or one serial port configured for use under Windows
•
a supported version of Microsoft Windows with tCP/IP drivers loaded for the network device noted above. •
Microsoft .net Runtime Library, DOtnetFX.eXe •
network (optional)
to use the system with a network Device, the system requires tCP/IP to be installed on the target systems according to the following minimum
requirement:
a Windows compatible network device for installation of tCP/IP. this will be a nIC card for network operation or may be a serial port for dialup access or •
stand alone operation.
an MS Windows compatible tCP/IP route between the WinWRM2 host system and the network Device (s) that will allow unfiltered tCP/IP con- •
nections using the selected tCP/IP Port.
5000 Highlands Parkway
Suite 150
Smyrna Georgia 30082
uSa
t +1.770.432.2744
F +1.770.432.9179 BP 1
F-13113 Lamanon
France
t +33 (0) 4 90 59 59 59
F +33 (0) 4 90 59 55 18 P.O. Box 506
FI-20101 turku
Finland
t +358 2 4684 600
F +358 2 4684 601 Ruhrstrasse 49
D-22761 Hamburg
Germany
t +49 40 85193 0
F +49 40 85193 256