Minuteman E20 SPORT Walk-Behind Scrubber Disc Traction Drive - Manual (Page 30)

30
Machine Operation
Turn on Machine
Turn key to operate position ( I ). Wait for battery gauge to stop flashing. (If flashing continues, see troubleshooting guide)
Turn on Vacuum
Lower squeegee into operating position, depress operator bail handle.
Turn on Brush Motor
Select normal or high speed RPM w/key, next to circuit breakers. Lower the scrub deck to the floor by moving the brush lift
pedal from the “home” (down) position to the operating position (up). Depress the operator bail handle.
Turn on Cleaning Solution
Move solution lever from closed (down) position up to the desired flow position. With the scrub deck on the floor, depress
the bail handle, solution will begin to flow.
Note: The solution solenoid will stop solution flow whenever the bail handle is released.
Direction Switch
Select direction of machine by moving the directional rocker switch from the neutral position to the forward or reverse
position. The direction of the machine movement is shown on the operator panel with forward and reverse arrows.
Speed control
Move the speed dial to the desired position. Turning the dial clockwise increases the speed. Turning the dial counterclockwise
decreases the speed. When dial is all the way counter-clockwise, machine will not move.
Driving
Depress the operator bail handle, the machine will move in the direction selected.