Meriam M1 – Series Pressure Calibrator - Manual (Page 10)

M1 Series – PC Instruction Manual 9R000035-IR
E.O. 6409 JAN 2008
www.meriam.com
Page 10 of 18
REC View:
First, set the M1 to NORMAL mode (no functional mode icons on). Then
enter REC View mode by pressing both the B and U
keys until the REC
icon illuminates.
Second, press the U key to cycle through the stored values. The pressure value
on the LCD will blank briefly every time a sample is displayed, and after all
the recorded samples have been viewed, “----” will be displayed and the
following step (stop and exit REC View mode) will happen automatically.
Third, to stop and exit REC View mode, press both the B and U keys. The
M1 will return to NORMAL mode (the REC icon will go off). This step can
be done anytime the REC icon is on.
Auto Shut-Off
To conserve battery life, the M1 will automatically power off after 30 minutes
of keypad inactivity.