Max Machinery 290 Series Analog (295, 296 and G Series Transmitters) - Manual (Page 12)

12 IH 295-200-350 • rev. 6/2011 • ©2010-11 Max Machinery, Inc.
EC Declaration of Conformity
We, Max Machinery Inc. declare as manufacturer under our sole responsibility that the product
series 295/296 Explosion Proof Flow Transmitter is in conformity with the provisions of the
European Community Directives as shown below.
Applicable Series: Part numbers of the format 295-xx1-x00 and 296-xx1-x00 where ‘x’ does not
affect conformity to the standards.
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
EN 61000-6-2:2005 Electromagnetic Immunity
EN 61000-6-4:2007 Electromagnetic Emission
ATEX Directive 94/9/EC designed and manufactured in accordance with Annex II of the Atex Directive
EN 60079-0:2009 Explosive atmospheres general requirements
(Note: no routine verification and tests are required by clause 27)
EN 60079-1:2007 Protection by flameproof enclosures type d”
Designation: 0539 II 2 G Ex d IIB Tx Gb
EC Type examination certificate DEMKO 11 ATEX 1013058X provided by
UL International DEMKO A/S NB Number: 0539
P.O. Box 514, Lyskaer 8, DK-2730 Herlev, Denmark
Product quality assurance notification #11 ATEX Q1116140 provided by UL Demko
Production control done to ISO 9001:2008, certificate #C2010-01864
May
24, 2011
Bryan Snyder Max Machinery Inc.
Engineering Manager 33A Healdsburg Ave.
Healdsburg, CA USA
(707) 433-2662