Max Machinery 290 Series Analog (295, 296 and G Series Transmitters) - Manual (Page 11)

33A Healdsburg Avenue
Healdsburg, CA 95448
T + 1 707.433.2662
F + 1 707.433.1818
Max Machinery, Inc.
maxmachinery.com
11
-25 0
20-
20
40-
40
60-
60
80-
80
100-
100 120 130
Fluid Temperature °C
Ambien
t T
emper
at
ur
e °C
100
90 90 -
75 75-
T6 T5 T4
75 90 130
Temperature Classification
Temperature class is a function of fluid temperature used in the meter and ambient temperature.
For hot fluids, meter must be insulated and transmitter must be left exposed. All transmitters are
rated to operate within the BLUE region, but only the remote sender unit variants (295-x5x-xxx) can
operate up to the maximum temperatures shown in the chart. Consult factory for installation details
when operating near temperature limits.
Temperature class chart for all explosion proof variants:
Note: Consult factory to determine the functional temperature limit of your transmitter variant. Temperature class
ratings do not correspond with the continuous duty area for the electronics within the transmitter. A complete
description of your transmitter may be found on the Max Machinery web site (www.maxmachinery.com). Individual
specification sheets and product family manuals are also available for viewing or downloading.
Electrical Requirements
The device must be powered with a Class 2 power supply. Electrical loads are specific to model number’s:
Part #’s Transmitter Type
Electrical Input
Requirements
Output Electrical Requirements
29x-0xx-0xx Pulse Output Transmitter 5-28Vdc 40mA Single Line 0-5V 10mA (500 ohm pulldown or greater)
29x-1xx-0xx
Quadrature Output
Transmitter
5-28Vdc 50mA 2 Lines 0-5V 10mA each (500 ohm pulldown or greater)
29x-2xx-0xx
mA Output Transmitter
(24Vdc)
24-28Vdc 50mA Isolated current loop, max 500 ohms in line, 12Vdc max
29x-2xx-1xx
mA Output Transmitter
(12Vdc)
12-15Vdc 100mA Isolated current loop, max 500 ohms in line, 12Vdc max
29x-3xx-0xx
V Output Transmitter
(24Vdc)
24-28Vdc 50mA Isolated voltage loop, max 500 ohms in line, 12Vdc max
29x-3xx-1xx
V Output Transmitter
(12Vdc)
12-15Vdc 100mA Isolated voltage loop, max 500 ohms in line, 12Vdc max
29x-6xx-0xx
Level Shifter Pulse Output
Transmitter
5-28Vdc 30mA Single line, current sinking, max 28Vdc, max 25mA