Luminex 200 LDS User Manual Update - Manual (Page 7)

Safety Addendum: Luminex 200 with LDS 1.7
PN 89-00002-00-240 Rev A 7
This label appears above the laser apertures located inside the optics
enclosure inside the Luminex 200 analyzer.
Barcode Reader Laser
Do not stare into the beam or shine it into other people’s eyes.
Mechanical
Access doors must be closed while operating the Luminex 200
analyzer; the operator must be present during operation.
Biological
Warning: During operation, this system contains exposed,
moving parts. Risk of personal injury is present. Observe all
warnings and cautions.
Warning: During operation, this system contains exposed,
moving parts which could result in puncture hazard. Risk of
personal injury is present. Keep hands and fingers away from the
Luminex XYP instrument slot during operation.
Warning: During operation, this system contains exposed,
moving parts which could result in pinch point hazard. Risk of
personal injury is present. Keep hands and fingers away from the
Luminex XYP instrument slot during operation.
Warning: Human and animal samples may contain biohazardous
infectious agents.
Where exposure (including aerosol) to potentially biohazardous
material exists, follow appropriate biosafety procedures and use
personal protective equipment, such as gloves, gowns, laboratory
coats, face shields, or mask and eye protection, and ventilation
devices.
Observe all local, state, and federal biohazard handling
regulations when disposing of biohazardous waste material.