Luminex 200 LDS User Manual Update - Manual (Page 3)

Safety Addendum: Luminex 200 with LDS 1.7
PN 89-00002-00-240 Rev A 3
Safety Precautions
Read the following safety information before setting up or using the
Luminex 200 analyzer. A user should be present during operation.
This system contains electrical, mechanical, and laser components
which, if handled improperly, are potentially harmful. In addition,
biological hazards may be present during system operation.
Therefore, we recommend that all system users become familiar with
the specific safety advisories below, in addition to adhering to
standard laboratory safety practices. The protection provided by the
equipment may be impaired or the warranty voided if the system is
used in a manner not specified by the instructions or by Luminex
Corporation.
This caution label appears on the back of the Luminex 200 analyzer
and on the Luminex XYP instrument.
.
Do not perform any maintenance or cleaning of the system’s
electrical components, with the exception of replacing fuses.
This label appears on the back panel of the Luminex 200 analyzer,
the Luminex XYP instrument, and the Luminex SD system.
The Luminex 200 analyzer, XYP instrument, and SD system comply
with European Union (EU) safety requirements and, therefore, may
be marketed in the Europe Single Market.
The Luminex 200 analyzer, XYP instrument, and SD system have
been tested by Underwriter Laboratories, Inc.
® (UL).