Magnum Venus Plastech DuraMAX Gun DMX-3000 - Manual (Page 15)

DuraMAX Gun Manual
Rev. 12/2012 Page | 15
Introduction:
This manual, the DURAMAX GUN MANUAL, provides information you need to perform
simple maintenance and repair on your equipment.
Step-by-step assembly and disassembly procedures are included for each
component.
Please read the manual carefully. Follow the steps in the order given, otherwise you
may damage the equipment or injure yourself.
DANGER: Always wear proper safety equipment, including eye protection and gloves
when performing service and repair on this equipment.
During Disassembly:
As you disassemble the equipment, lay out the components on a clean surface in the
correct order and direction. This will help you to reassemble them.
Gun Assemblies:
This manual covers the following DuraMAX Gun Assemblies:
DMX-3000
DURAMAX GUN ASSEMBLY
DMX-3000-A AUTO DURAMAX GUN ASSEMBLY
DMX-3000-ITW DURAMAX GUN ASSEMBLY – REVERSALBE TIP
DMX-3000-SIG DURAMAX GUN ASSEMBLY – WITH AIR SIGNAL
DMX-3000-ST DURAMAX GUN ASSEMBLY – FIT MIX CHAMBER
DMX-3000-W DURAMAX GUN ASSEMBLY – WETOUT GUN
DMX-3000-W-SIG DURAMAX GUN ASSEMBLY – WETOUT & AIR SIGNAL