Magnum Venus Plastech Gel Coat Gun EMG-1500 - Manual (Page 15)

Gun Handle Disassembly
1. Remove Spring Retainers (54000-1) and Springs (04039-1) from handle.
PROCEDURES 1 -4 BELOW FOR EMG-1500 ONLY –
1. Remove Valve Body Assembly (54440-1) from Handle (54350-3).
2.
Remove Spring (04070-1) and Poppet Assembly (54501-1).
3.
Unscrew Retainer (54420-1) from Valve Body (54440-1)
4.
Remove O-Ring (O-S-104A)
Gun Handle Assembly
1. Apply lubricant to Springs (04039-1) and insert into Gun Handle.
2.
Thread Spring Retainers (54000-1) over Springs (04039-1) into Gun Handle.
PROCEDURES 1-4 BELOW FOR EMG-1500 ONLY
–
1. Slide Spring (04070-1) onto the end of the Poppet Assembly (54501-1)
2.
Insert Poppet Assembly (54501-1) into Valve Body (54440-1)
3.
Slide O-ring (O-S-104A) over Poppet Assembly (54501-1) and retain with
Packing Retainer (54420-1)
4.
Screw Assembled Valve Body (54440-1) into the Gun Handle (54350-3)