Magnum Venus Plastech RT-4000 RTM INJECTOR TRIGGER - Manual (Page 15)

RT-4000 Remote Trigger Manual
Rev. 12/2012 Page | 15
Introduction:
The RT-4000 RTM Injector Trigger is a modular system used to manually control the
RTM process. It can be used with a basic Primax pumping system or added to an
existing RTM system. This small control box connects to the unit with approximately 12
feet of line allowing the operator to control the RTM process from a position away from
the gun.
The RT-4000 gives the option to control the following components:
• RTM Valve ON (injection port)
• RTM Valve OFF (injection port)
• Gun ON
• Gun OFF
• Air Purge / Flush
• Solvent Purge / Flush