Magnum Venus Plastech RT-5000 RTM INJECTOR TRIGGER - Manual (Page 21)

RT-5000 Remote Trigger Manual
Rev. 12/2012 Page | 21
DAILY SHUT-DOWN:
1.
Disconnect the gun from the injection port.
2. Flush the gun with solvent.
3. Remove RTM-LT-CK assembly from the mix chamber.
4. Turn off the main inlet air ball valve at the manifold.
5. Release the solvent flush tank pressure, by lifting pressure relief valve.
6. Release Catalyst pressure by opening the recirculation valve on the catalyst
manifold.
7. Remove the Mix Housing and clean it.
8. Wipe the gun block face with a clean rag.
9. Hang the gun with the gun block exit holes facing down.