Magnum Venus Plastech MicroPro - Manual (Page 18)

MicroPro Operations Manual
Rev. 09/2012 Page | 18
Material Accumulator
Safety Relief Valve
Material Pressure Relief Valve
Fluid Pressure – Material Manifolds:
FLUID PRESSURE GAUGE – This displays the fluid pressure for each of the two
components. These are located at the material manifold for each material.
MATERIAL PRESSURE RELIEF VALVE – the valve is used to relieve the
material fluid pressure back to the source container.
SAFETY RELIEF VALVE – the safety relief valve will automatically open to
prevent excessive fluid pressure. The safety relief valve is set to open at a preset
pressure and returns the material to the source container.
Material Manifold:
Fluid Pressure Gauge