Magnum Venus Plastech UltraMAX MULTI–COLOR GELCOATER MVE-1400-X-1 - Manual (Page 27)

UltraMax Multi-Color Gelcoater Manual
Rev. 03/2013 Page | 27
External Mix Daily Shut-Down:
1.
Wipe the face of the nozzle and catalyst tip with solvent.
2.
Turn off the main air ball valve at the air manifold.
3.
Remove the nozzle and catalyst tip and clean with solvent.
4.
Wipe the gun face clean with a rag or brush and solvent.
5.
Hang the gun with the gun block exit holes facing downwards.
Internal Mix Daily Shut-Down:
1.
Flush the Mix Housing and air assist with solvent.
2.
Wipe the face of the Air Assist nozzle after flushing.
3.
Turn off the main air ball valve at the air manifold.
4.
Release the solvent flush tank pressure.
5.
Disassemble the Air Assist and clean it with solvent.
6.
Remove the Mix Housing and clean.
7.
Wipe the Gun Block face with a clean rag.
8.
Hang the gun with the gun block exit holes facing downwards.