Magnum Venus Plastech PATRIOT TESTING & ADJUSTING - Manual (Page 51)

Patriot - Testing & Adjusting Manual
Rev. 01/2013 Page | 51
DAILY SHUT DOWN CHECKLIST FOR PATRIOT
Internal Mix Systems
ACTIVITIES MUST BE DONE IN THE SEQUENCE SHOWN, AND MUST BE TICKED OFF AS
COMPLETED. USE THIS CHECKLIST IN CONJUNCTION WITH THE OPERATING MANUAL FOR
THE PATRIOT UNIT. THIS SEQUENCE FOLLOWS ON FROM “DAILY START UP CHECKLIST –
INTERNAL MIX”
ACTIVITY
NO.
ACTIVITY TICK WHEN
COMPLETED
Priority Put on Respirator as specified for spray painting,
Protective Clothing, Eye Protection, and PVC Gloves
1 Flush the gun with solvent.
2 Wipe the face of the nozzle after flushing.
3 Turn off the main air ball valve at the air manifold.
4 Release the solvent flush tank pressure.
5 Remove the nozzle and clean it with solvent.
6 Remove the Mix Housing and clean it.
7 Wipe the gun block face with a clean rag.
8 Hang the gun with the gun block exit holes facing downwards.
ABNORMAL CONDITIONS OBSERVED AND CORRECTED
Abnormal Condition a a a a when
corrected
OPERATORS NAME _______________________________________ DATE: ________________
SIGN OFF WHEN SHUT DOWN CHECKS ARE COMPLETED: __________________________