beautypg.com

Magnum Venus Plastech PATRIOT 10 PAT-PH-10000 User Manual

Page 19

background image

Patriot Powerhead Manual PAT-PH-10000

Rev. 10/2012

Page | 19

10. Insert the Diaphragms (MPH-5010) into the upper and lower valve blocks with the

outside leading edge of the diaphragms facing out. Push the diaphragms all the
way down into the valve block bore.

11. Install the valve Exhausts (MPH-5009) onto the upper and lower valve blocks

using the two socket head cap screws (F-CS-04C-08) into each of the two valve
exhausts and snug tight.

12. Install valve End Caps (MPH-2521) into the upper and lower valve blocks and

lightly snug tight.

13. Connect the air line to the Poly Tee (MPH-2538) on the side of the valve block.