Magnum Venus Plastech PATRIOT 10 PAT-PH-10000 - Manual (Page 15)

Patriot Powerhead Manual PAT-PH-10000
Rev. 10/2012 Page | 15
Introduction:
This manual covers the repair of the 10” diameter by 2” stroke length Patriot Powerhead:
• PAT-PH-10000 Patriot Powerhead Assembly
NOTE: Before starting any service work, release fluid and air pressure from
system. Remove the two air lines from the air motor. The air motor assembly
does not have to be completely removed from the system for service work.
Please read the manual carefully. Follow the steps in the order given, otherwise you
may damage the equipment or injure yourself. The reassembly will require the use of
removable thread locking compound, Lithium grease (08465) and SUPERLUBE O-ring
lubricant.
During Disassembly . . .
As you disassemble the equipment, lay out the components in the correct order and
direction. This will help you to reassemble them. It is important to have a current
drawing for reference during repair.
Tools required:
• Medium Removable Thread Locking Compound
• Brown Grease (08465)
• Super O-ring Lube (SUPERLUBE)
• 7/16-inch Socket Head Wrench (08472)
• Hex Wrench Set (08469)
• 9/16-inch Wrench (08476)
• 12-inch Adjustable Wrench (08468)
• Flat Blade Screw Driver
• Snap Ring Pliers
Use Seal Kit: PAT-PH-10000-SK