Lectrosonics UCR511 - Manual (Page 21)

UHF Wireless Digital Hybrid TM Receiver
UCR511 REPLACEMENT PARTS AND ACCESSORIES
Part No. Description
32251 Velcro mounting strips
CCMINI Zippered, padded vinyl system pouch
CH12E AC power supply with US type 2-pin plug on
housing, 110 VAC input; 12 VDC, 2.8 A output.
VSR1 Thin velcro loop for power cable strain relief.
A8U UHF marine phosphor bronze antenna ­
straight connector, specify block.
A500RA UHF flexible whip antenna with right angle
BNC connector (470 - 608 MHz)
PS70 A/C power supply with US type 2-pin plug on
housing, 110 VAC input; 12 VDC, 2.8 A output.
UM500 Belt-pack Digital Hybrid Wireless TM transmitter
with over 50 mW power.
UMC200D Rack-mount multicoupler combining antenna
and power distribution for up to four Lectroson­
ics wireless microphone receivers. Includes
built-in power supply.
SIXPACK Portable multicoupler for field production
combining antenna and power distribution for
up to six Lectrosonics wireless microphone
receivers. Includes built-in rechargeable
battery pack for added mobility.
SNA600 Collapsible dipole antenna adjustable from 550
MHz to 800 MHz. Ideal for situations where a
full 360 degree receiving pattern is required as
opposed to a directional pattern.
ALP600 “Shark fin” Log Periodic Dipole Array (LPDA)
provides useful directional pattern over 500 to
800 MHz range. Ideal for portable applications
including temporary setups for field production.
Not intended to be left outdoors permanently.
ALP700A LPDA (Log Periodic Dipole Array) provides
useful directional pattern over a broad fre­
quency bandwidth (500 to 800 MHz).
ARG15-ARG100 Coaxial cables for remote antennas are
available from Lectrosonics in a variety of
lengths - from 2 to 100 ft. Cables include Velcro
tie wraps.
Rio Rancho, NM – USA 21