Lectrosonics VR Field (Wideband) - Manual (Page 19)

Digital Hybrid Wireless™ Modular Receiver System
Rio Rancho, NM, USA 19
Installing USB Drivers
This sequence and the screens are typical of installing
the drivers on a computer running 64-bit Windows 7.
Insert the disk into your local drive. When the first
screen appears, select Install USB Drivers for either
the 32-bit or 64-bit version to match your computer
operating system. The driver only needs to be installed
one time on each computer that will be connected to
the processors.
Select 32-bit or 64-bit to match
your operating system
When the Welcome Screen appears, click on Next to
continue the installation.
Select Next to continue
The EULA (End User License Agreement) must be ac-
cepted in order to continue the installation. Click on the
radio button labeled I accept the EULA and then on
Next to continue.
A progress screen will appear briefly as the installation
proceeds, followed by the confirmation screen that veri-
fies that the drivers were successfully installed. Click on
Finish to exit the confirmation screen.