Lectrosonics UCR411a - Manual (Page 22)

UCR411A
LECTROSONICS, INC. 22
32251
Velcro mounting strips
CCMINI
Zippered, padded vinyl system pouch
CH12
AC power supply with US type 2-pin plug on hous-
ing, 110 VAC input; 12 VDC, 400 mA output.
VSR1
Thin velcro loop for power cable strain relief.
A8U
UHF marine phosphor bronze antenna - straight
connector, specify block.
PS70
A/C power supply with 3-pin NEMA socket on hous-
ing, 100-240 VAC input; 13.8 VDC, 2.8 A (max.)
output.
UMCWB
Rack-mount multicoupler combining antenna and
power distribution for up to four Lectrosonics wire-
less microphone receivers.
SNA600
Collapsible dipole antenna adjustable from 550
MHz to 800 MHz. Ideal for situations where a full
360 degree receiving pattern is required as op-
posed to a directional pattern.
ALP Series (ALP500, ALP620, ALP650)
“Shark fin” Log Periodic Dipole Array (LPDA)
antennas provide useful directional pattern over
500 to 800 MHz range. Ideal for portable applica-
tions including temporary setups for field production
ARG15-ARG100
Coaxial cables for remote antennas are available
from Lectrosonics in a variety of lengths - from 2 to
100 ft. Cables include Velcro tie wraps.
21425
6 ft. long power cord; coaxial to stripped & tinned
leads. Coaxial plug: ID-.080”; OD-.218”; Depth- .5”.
Fits all compact receiver models that use CH12
power supply.
21472
6 ft. long power cord; coaxial to stripped & tinned
leads. Right angle coaxial plug: ID-.075”; OD-.218”;
Depth- .375”. Fits all compact receiver models that
use CH12 power supply.
Replacement Parts and Accessories
VSR1
CH12
PS70
A500RA
.475”
.375”
O.D
.
.375”
.35”
.375”
O.D
.
21425
21472