Controlled Products Systems Group ICON26 - Manual (Page 34)

33
Icon Page
STRIKE TIME
Strike Time sets the amount of time your gate or door relay will be held open.
TALK TIME
( fig c.)
( fig e.)
( fig g.)
In the Program Selection Screen ( fig g.), Press the key. Choose the desired Talk Time, press for 20 seconds,
for 40 seconds, or for 80 seconds ( fig h.). Press the key to confirm your entry.
You can set the amount of time to talk on the Entry Phone at 20, 40, or 80 seconds.
SELECT PROG MODE:
(T)Talk Time
TALKTIME IS 20 SEC
(B)40 Sec (C)80 Sec
In the Program Selection
Screen (
fig a.), Press the
key.
S
The strike time can be set for
both gates and doors (
fig b.)
For either the Gate or Door Strike TIme, you may now type in a name and location (up to 13 characters) to which you want
the programmed strike time applied. ( fig e.) and (fig f.) Press the key to complete the transaction.
Press the key to set the Door Strike Time. Type in
a time from 1 to 99 seconds ( fig c.). Press the
key to enter your selection.
D
Press the key to set the Gate Strike Time. Type in
a time from 1 to 12 seconds ( fig d.). Press the
key to enter your selection.
G
SELECT PROG MODE:
(S)Strike Time
( fig a.)
Door Strike Time > D
Gate Strike Time > G
( fig b.)
DOOR STRIKE TIME:
[01-99] 10 Seconds
DOOR NAME/LOCATION
South Entry Door GATE NAME/LOCATION
North Side Gate
( fig d.)
( fig f.)
( fig h.)
GATE STRIKE TIME:
[01-12] 05 Seconds
A T
B C