Controlled Products Systems Group DIALCODE - Manual (Page 5)

All systems, no matter what the memory capacity, are
equipped with 60 different Utility codes. To access the
facility within the time zone set, the Utility Company
must first press the key TWICE and then enter
their 4-digit code. If it is within the programmed time
zone for entry, the screen will display “Access
Granted” (fig c.) and access will be allowed. If,
however, it is not within the time zone for entry, the
display will inform the user and access will not be
allowed (fig d.)
Residents are assigned a 6-digit, personalized keycode
for accessing the facility. To use the keycode assigned,
the resident must first push the key once and
enter their keycode. The screen will display “Access
Granted” (fig a.) and access will be allowed. If an
incorrect keycode is entered, the system will inform the
user of the invalid entry (fig b.) The resident can then
re-enter their keycode.
RESIDENT USE
4
LC/VF Page
USING KEYCODES AND UTILITY CODES
(ACTIVE ENTRY 1 ONLY)
* ACCESS GRANTED *
Please Enter
(fig a.)
* ACCESS GRANTED *
Please Enter
(fig c.)
* INVALID ENTRY *
Invalid 6-Digit Code
(fig b.)
* ACCESS DENIED *
Not In Access Period
(fig d.)
RESIDENT 6-DIGIT KEYCODES
INDIVIDUAL UTILITY CODES
EXAMPLE - KEY CODE 002543 =
0 0 2 5 4 3
EXAMPLE - UTILITY CODE 8716 = 8 7 1 6
SCREEN SAVER MODE (VF ONLY)
PRESS ANY KEY
(fig e.)
If the VF Dial Code System is inactive for 15 seconds it
will go into sleep mode. The screen will continue to
display the scrolling message “Press Any Key” until a
key is pressed (fig e.) The Screen saver mode is not
available while in program mode.