Controlled Products Systems Group DIALCODE - Manual (Page 21)

MEMORY CARD INSTALLATION
VIEWING THE SOFTWARE VERSION
20
LC/VF Page
Turn power on and insert Memory Card into Main
Memory Card Slot (Main Memory Card in back slot,
Backup Memory Card in front slot.) (fig a.) Push it all
the way in until card “snaps” into place and the release
button pops up. The screen should display the
“Welcome Screen” (fig b.)
To view the memory capacity of the system or to view
the software version currently running on the system in
operation an information screen is accessible on all
Dial Code systems for easy reference. Turn power off
and insert Memory Card in Main Memory Slot. Turn
power on and the information screen should display as
seen in (fig e.)
If the screen continues to display the “Insert Memory
Card” screen (fig c.) then eject memory card by
pressing the corresponding release button down and
reinsert Memory Card into main slot (fig d.). Otherwise
continue with programming.
WELCOME
Insert Memory Card
IN MAIN SLOT
Memory Capacity
Software Version Number
(fig a.)
(fig b.)
(fig c.)
DIAL CODE LC-250
REV. 1.00_
(fig e.)
(fig d.)
Push Button
Card Pops Out
Main Memory Card Release Button
Main Memory Card Slot
RS 485 Memory Card Slot