DoorKing 1838 Multi-Door Access Controller - Manual (Page 31)

3.3.5 Touch-tone / Rotary-dial
This programming sequence will set the remote call station to dial out in either a touch-tone or rotary
format. Generally, this will be set for touch-tone.
Factory setting = touch-tone.
NOTE: This programming step is only used when a DKS Remote Call Station is connected to
the 1838 system.
1. Press * 0 7 and enter the four digit MASTER CODE _ _ _ _ (beep).
2. Enter 0 * (beep) for touch-tone or enter 1 * (beep) for rotary.
3. Press 0 # TOGETHER to end this programming step (beeeeeep).
1838-065-U-4-13 Page 31