Controlled Products Systems Group SPX-5551 - Manual (Page 2)

Page 2 of 20
This manual covers the operation and setup of the Cypress Suprex RF SPX-5600 series units.
Overview :
The SPX-5600 series of RF Wireless solutions provides a wireless bridge from Card Readers with gates or door
hardware to most access control manufacturers panels. The SPX or Suprex products typically include both the remote
( Door/Gate ) unit and the central ( AC Panel ) unit. In the case of the SPX-5600 series of wireless products optional
repeaters / extenders are also available.
Features:
-- Service mode for setup and configuration.
--“Quiet” protocol to conserve bandwidth and power
-- Field configurable reader formats
-- Multifunction indicator for determining operational status of the unit
-- Auxiliary I/O connections available for Door/Gate/Panel status signaling.
-- Multiplexing of RF bridge providing for additional door/gate on a single RF link.
-- Economical expansion capabilities using Suprex Lynk technology
Electrical Specifications:
(Each Unit)
Supply Voltage! ! 8-16VDC
Current! ! ! 500mA
RF Specifications:
2.4GHz frequency
AES Encryption optional
SPX-5600 Series:
Cypress Suprex SPX-5600 Series
Physical
SPX-56XX - Weatherproof Enclosure
6.75” x 3.75” x 2.00” (Each unit) SPX-56XX - Weatherproof Enclosure
6.75” x 3.75” x 2.00” (Each unit)
Temp
Storage(-55˚C to + 150˚C)
Operating(-40˚C to +80˚C) Storage(-55˚C to + 150˚C)
Operating(-40˚C to +80˚C)
Humidity 95% (non-condensing) 95% (non-condensing)
Power
Input
Unreg Input 8 to 16 VDC
*
@ 300mA Max
Power
Output +5VDC @100mA
Data I/O Interface
Reader -Wiegand, Strobed (Clock & Data),
LED - 0 - 30V
Electrical and Mechanical Specifications